Don't have any decent scrappys near me
![Image](http://i491.photobucket.com/albums/rr276/BenArmitage_photos/IMG_1107.jpg)
Prise light out.. Spring catch at the front keeps it in
![Image](http://i491.photobucket.com/albums/rr276/BenArmitage_photos/IMG_1112.jpg)
Unplug light.. Unscrew 2 torx screws
![Image](http://i491.photobucket.com/albums/rr276/BenArmitage_photos/IMG_1113.jpg)
Pull out original trim.. Back to front
![Image](http://i491.photobucket.com/albums/rr276/BenArmitage_photos/IMG_1116.jpg)
Mark out the size of the new hole.. Measure twice and cut once lol
![Image](http://i491.photobucket.com/albums/rr276/BenArmitage_photos/IMG_1117.jpg)
Cut out the new hole.. I used a stanley knife.. Ensure blade is sharp
And remove metal surround
![Image](http://i491.photobucket.com/albums/rr276/BenArmitage_photos/IMG_1118.jpg)
The black part on the back of the sunglasses holder unclips off the grey part
Remove the black part.. 4 clips.. And put this in roof lining
![Image](http://i491.photobucket.com/albums/rr276/BenArmitage_photos/IMG_1119.jpg)
Plug microphone back in.. If you have one
Make sure wires for light are accessible
Clip in new trim.. Clip front in then back
![Image](http://i491.photobucket.com/albums/rr276/BenArmitage_photos/IMG_1120.jpg)
Plug light back in and replace
Insert sunglasses
Sit back and appreciate
![Image](http://i491.photobucket.com/albums/rr276/BenArmitage_photos/IMG_1121.jpg)