J1 Automotive Cold Air Intake Kit for sale

Idle_S.PORT · Post by **Idle_S.PORT** » Wed Mar 14, 2012 2:40 pm

Hi,
Im selling my J1 Automotive Cold Air Intake Kit for the Fiesta Zetec S/Ti-VCT / Zetec S1600 MK7.
This kit fully replaces the standard air filter and housing and includes the hose and clamps.
Fitment takes roughly 10 mins and the use of a screw driver with star type attachment.
Only selling as I have changed my car and didnt want the dealers taking the p***
Makes the engine bay look the dogs and does make a difference to performance.
Was only on my car for about 100 miles!!

It retails at £204, Im selling for £115 with postage, £100 if collected.

Send me an email if interested!

Pic Below on attachment

This is what PumaSpeed had to say. "Vehicle Performance
When independently tested on a chassis DYNO, the J1 system
boosted power by an average of 6.1%, equating to as much as
5.4 bhp, depending on the engine variant. Torque improved
substantially, especially at the lower revs.
Intake noise is also improved, with a fantastic growl that emanates
from the intake as you run through the rev range.
All this on the 1.25 !! So what will the 1.6 do ?? "

patterson · Post by **patterson** » Wed Mar 14, 2012 2:58 pm

Idle_S.PORT wrote:Hi,
Im selling my J1 Automotive Cold Air Intake Kit for the Fiesta Zetec S/Ti-VCT / Zetec S1600 MK7.
This kit fully replaces the standard air filter and housing and includes the hose and clamps.
Fitment takes roughly 10 mins and the use of a screw driver with star type attachment.
Only selling as I have changed my car and didnt want the dealers taking the p***
Makes the engine bay look the dogs and does make a difference to performance.
Was only on my car for about 100 miles!!

It retails at £204, Im selling for £115 with postage, £100 if collected.

Send me an email if interested!

Pic Below on attachment

This is what PumaSpeed had to say. "Vehicle Performance
When independently tested on a chassis DYNO, the J1 system
boosted power by an average of 6.1%, equating to as much as
5.4 bhp, depending on the engine variant. Torque improved
substantially, especially at the lower revs.
Intake noise is also improved, with a fantastic growl that emanates
from the intake as you run through the rev range.
All this on the 1.25 !! So what will the 1.6 do ?? "

Interested where are you located?

Idle_S.PORT · Post by **Idle_S.PORT** » Thu Mar 15, 2012 12:27 am

Live in Stockport, Manchester. Bit of a drive from surrey!

Jdun5746 · Post by **Jdun5746** » Thu Mar 15, 2012 10:19 am

Yummy if I didn't have a holiday to go on and had some money I wouldn't mind, it'll be a great buy for someone

patterson · Post by **patterson** » Thu Mar 15, 2012 11:07 am

Idle_S.PORT wrote:Live in Stockport, Manchester. Bit of a drive from surrey!

Yeah it is my payday is Monday 26th il pm you then if you still have it

Idle_S.PORT · Post by **Idle_S.PORT** » Thu Mar 15, 2012 2:23 pm

No worries.

duffman09 · Post by **duffman09** » Wed Mar 28, 2012 8:51 pm

still got this mate ?

patterson · Post by **patterson** » Wed Mar 28, 2012 9:32 pm

patterson wrote:
Idle_S.PORT wrote:Live in Stockport, Manchester. Bit of a drive from surrey!
Yeah it is my payday is Monday 26th il pm you then if you still have it

So sorry I forgot about this post and have baught one new

sfewkes · Post by **sfewkes** » Wed Apr 04, 2012 10:13 pm

Is this still for sale? Very interested and can pay right away! Check your PM

j4k3 · Post by **j4k3** » Wed Apr 04, 2012 10:32 pm

Too late. I picked this up today. Top bloke

FiestaMk7.com Owners Resource