Wheel Spacer Help Please
Posted: Fri Jun 28, 2019 8:08 pm
Hi,
I bought some Eibach hub centric 15mm and 20mm spacers, My wheels are 4x108 and 4x100 multifit, and do NOT have any cut outs on the back of them to take the protruding nut used to bolt them to the hub, and also any thread that may protrude through the nut, The nut when just sat in the spacer protrudes approx 5 or 6 mm on the 15mm spacer, and 2mm on the 20mm spacer, this is without however much the thread may poke through once bolted to the hub,
Im lost on what to do as i have never used spacers before, am i just not able to use any spacers with my wheels ?
Any advice or help would be greatly appreciated
I bought some Eibach hub centric 15mm and 20mm spacers, My wheels are 4x108 and 4x100 multifit, and do NOT have any cut outs on the back of them to take the protruding nut used to bolt them to the hub, and also any thread that may protrude through the nut, The nut when just sat in the spacer protrudes approx 5 or 6 mm on the 15mm spacer, and 2mm on the 20mm spacer, this is without however much the thread may poke through once bolted to the hub,
Im lost on what to do as i have never used spacers before, am i just not able to use any spacers with my wheels ?
Any advice or help would be greatly appreciated