Hi all,
since the cold weather has kicked in I've noticed that my heater does not blow warm at all. This includes running engine for 40 mins as well (so I don't think it's a case of not reaching right temp).
Not sure if linked, but last year I used to hear a clicking /cranking noise from behind the dash on start up, but I found that this didn't happen if I had the heater set to cold.
I've done a few searches on Internet and can only see this issue resolved when it's a lot earlier year, not this model. I'm not sure if it's a heater solenoid or the heater controls I need to replace, or if something totally different. Every part I see for the solenoid replacement is for the previous model, so not sure if something else is used now. I did check the coolant level a week or so ago, and noticed that this was very slightly below the min level, and topped it up to max.
FYI it's a 2009 titanium with auto temp controls.
Hoping someone can point me in the right direction.
Many thanks
Heater issues
-
jasonl1599
- Fiesta Mk7 Regular
- Posts: 67
- Joined: Fri Aug 24, 2012 6:55 am
- Drives: Titanium 1.6 TDCI
- Refferer: Search Engine
{text-align: center;}
-
singletg
- Newbie (Welcome Me!)
- Posts: 2
- Joined: Sun Jan 17, 2016 9:46 am
- Drives: fiesta
- Refferer: bing
- Country: uk
Re: Heater issues
Hi Did this get fixed I have the same problem.
Thanks
Thanks
-
dlovesg
- Newbie (Welcome Me!)
- Posts: 3
- Joined: Wed Mar 30, 2016 10:49 pm
- Drives: Fiesta titanium
- Refferer: search engine
- Country: United Kingdom
Re: Heater issues
jasonl1599 wrote:Hi all,
since the cold weather has kicked in I've noticed that my heater does not blow warm at all. This includes running engine for 40 mins as well (so I don't think it's a case of not reaching right temp).
Not sure if linked, but last year I used to hear a clicking /cranking noise from behind the dash on start up, but I found that this didn't happen if I had the heater set to cold.
I've done a few searches on Internet and can only see this issue resolved when it's a lot earlier year, not this model. I'm not sure if it's a heater solenoid or the heater controls I need to replace, or if something totally different. Every part I see for the solenoid replacement is for the previous model, so not sure if something else is used now. I did check the coolant level a week or so ago, and noticed that this was very slightly below the min level, and topped it up to max.
FYI it's a 2009 titanium with auto temp controls.
Hoping someone can point me in the right direction.
Many thanks
Hi can I please ask if you ever resolved this issue, I'm having the same problem with 2010 titanium thanks