Seans Mk7
-
Seans_Fes_Mk7
- Fiesta Mk7 Major Contributor
- Posts: 347
- Joined: Sat Aug 20, 2011 4:20 pm
- Drives: Mk7 Style +
- Refferer: Search Engine
- Location: Shrewsbury, West Midlands, UK
Re: Seans Mk7
Arch Enemy will do for £90 a pair, depending on if you live close enough or are willing to take a trip. Not checked but I don't think anywhere is close to me :/
{text-align: center;}
-
kozza
- Fiesta Mk7 Regular
- Posts: 52
- Joined: Thu Mar 01, 2012 12:22 am
- Drives: mk7 feista 1.25
- Refferer: Search Engine
Re: Seans Mk7
can you turn these ap coil overs all the way to there lowest point with 17inch alloys on ? or will it scrape and if so how low is safe to go with these ?
Mk7 fiesta+wolfrace alloys+induction kit+custom painted plastics+custom painted defuser+custom built exhaust
-
Seans_Fes_Mk7
- Fiesta Mk7 Major Contributor
- Posts: 347
- Joined: Sat Aug 20, 2011 4:20 pm
- Drives: Mk7 Style +
- Refferer: Search Engine
- Location: Shrewsbury, West Midlands, UK
Re: Seans Mk7
The backs have the adjusters out, still not low enough for me, but it will have to do. The fronts i wound up 3 revolutions from the bottom to start, then had to wind it up 2 more after they bed in due to the lower splitter (I still think it's a stone guard but I keep getting told otherwise) catches alot, and full lock causes a horrible scraping noise from the tyre catching. You could easily have it lower than mine, just remove the lower splitter to stop it scraping everywhere, never full lock the wheels, and drive VERY carefully over speed bumps and pot holed roads.
Hope that helps at all.
Hope that helps at all.