Ford Fiesta mk7 1.25 16v

[ToniFiesta]

Hi! I'm glad to be registrated to this forum. I'm not from UK & co. I'm from Croatia, so I apologize for my english.
My ride is a Petrol 1.25 16v 82 horsepower engine.
I'm very happy with the engine and tha car. For that much horsepower is a very sporty engine.
Right now a I have 24854 miles on the car.
Wheels are 195/50/15 Michelin Pilot Sport.

Some pictures:




Bought this Zetec S Badge on Ebay.

This is where I succeeded to get my consumption so low only 4.3 liters not so accurately because a did only few miles but it was around 4.5 the lowest.

Highway picture

Back to the Future picture

And some crazy ass car that I passed by.


My next upgrades are swithcing the grey fog sorrounds with the chrome ones. (found cheap from ebay, not original but it can do)

[Ryan Middleton]

Nice ride, I like the colour a lot, I'd have a look for the front ZS spoiler diffuser and front bumper, so it's not obvious you've stuck the S badge on probably pick that stuff up on ebay

[ToniFiesta]

Thank. Correct, i loved the look with the Zetec S badge. I was looking for a rear diffusor and front, but it turned out that if I replace this will have a lot problem with the front bumper because it is more likely i will hit a road bumper or get stuck on a kerb, Now with the stock front i hit a bit to a kerb (not so much, but it happens, especialy when parking). But for a rear is not a bad idea. I was looking at rear ZS spoiler.
Looking at buying a lether gear knob, to be the same with the lether steering wheal, Puting a carpet at the back in the trunk.

[Ryan Middleton]

To be honest, unless you have very high kurb stones where you are, there should be no problem with the front bumper, unless you have had your car lowered? and i would definitely recommend the spoiler on the back, really finishes off the rear end nicely.

[ToniFiesta]

Haven't lowered the car, stock is ok. Some areas of the town has small kerbs, and some areas of the town has a higher kerbs. But will look at front bumper.
Question: I saw a front lip (separeted I guess) , does that lip can be fitted on the regular stock front bumper, or I have to have the zetec front bumper?
This thing: http://www.european-parts.net/catalog/p ... cts_id/893