Page 1 of 1

Ford Fiesta mk7 1.25 16v

Posted: Fri Jan 04, 2013 5:26 pm
by ToniFiesta
Hi! I'm glad to be registrated to this forum. I'm not from UK & co. :) I'm from Croatia, so I apologize for my english.
My ride is a Petrol 1.25 16v 82 horsepower engine.
I'm very happy with the engine and tha car. For that much horsepower is a very sporty engine.
Right now a I have 24854 miles on the car.
Wheels are 195/50/15 Michelin Pilot Sport.

Some pictures:
Image
Image
Image
Image
Bought this Zetec S Badge on Ebay.
Image
This is where I succeeded to get my consumption so low only 4.3 liters not so accurately because a did only few miles but it was around 4.5 the lowest.
Image
Highway picture
Image
Back to the Future picture
Image
And some crazy ass car that I passed by. :D
Image

My next upgrades are swithcing the grey fog sorrounds with the chrome ones. (found cheap from ebay, not original but it can do)

Re: Ford Fiesta mk7 1.25 16v

Posted: Fri Jan 04, 2013 7:34 pm
by Ryan Middleton
Nice ride, I like the colour a lot, I'd have a look for the front ZS spoiler diffuser and front bumper, so it's not obvious you've stuck the S badge on ;) probably pick that stuff up on ebay

Re: Ford Fiesta mk7 1.25 16v

Posted: Fri Jan 04, 2013 8:07 pm
by ToniFiesta
Thank. Correct, i loved the look with the Zetec S badge. I was looking for a rear diffusor and front, but it turned out that if I replace this will have a lot problem with the front bumper because it is more likely i will hit a road bumper or get stuck on a kerb, Now with the stock front i hit a bit to a kerb (not so much, but it happens, especialy when parking). But for a rear is not a bad idea. I was looking at rear ZS spoiler.
Looking at buying a lether gear knob, to be the same with the lether steering wheal, Puting a carpet at the back in the trunk.

Re: Ford Fiesta mk7 1.25 16v

Posted: Thu Jan 17, 2013 11:43 am
by Ryan Middleton
To be honest, unless you have very high kurb stones where you are, there should be no problem with the front bumper, unless you have had your car lowered? and i would definitely recommend the spoiler on the back, really finishes off the rear end nicely.

Re: Ford Fiesta mk7 1.25 16v

Posted: Fri Jan 18, 2013 12:43 pm
by ToniFiesta
Haven't lowered the car, stock is ok. Some areas of the town has small kerbs, and some areas of the town has a higher kerbs. But will look at front bumper.
Question: I saw a front lip (separeted I guess) , does that lip can be fitted on the regular stock front bumper, or I have to have the zetec front bumper?
This thing: http://www.european-parts.net/catalog/p ... cts_id/893