Rear Bumper Reflector

[Rob92]

Hi, new here and after some advice.

My rear bumper reflector has been cracked, I bought a new one from ford and am planning to fit it myself.

It's only two screws but they are soo hard to get too...

Anyone done this before and recommend a way to remove the old one and fit the new?

Thanks
Rob

[patterson]

Not done it my self but I would take bumper of

[Barry-Fiesta]

Hi
I am new here and yet to do my introductory post however, in the meantime, I am having the same issue as yourself in so far as I broke my rear reflector (and light cluster). I found this link which may help you.
Regards
Barry


http://www.fordownersclub.com/forums/to ... =reflector

[Barry-Fiesta]

So.....as per my above post, I replaced my n/s bumper reflector last weekend. The fitting itself is straight forward but it's a real struggle to access and tighten up the screw on the right hand side (as you look at it in situ). I'd suggest you will need a strong torch to assist the procedure, a flexible screwdriver extension will help and better still, remove the n/s back wheel.
Now all I have to do is to replace the rear light cluster as I managed to smash that as well when a large post jumped out behind me as I was reversing !