Grealish Panther Black MK7 ZS
-
- Fiesta Mk7 Regular
- Posts: 16
- Joined: Sat Feb 09, 2013 8:06 pm
- Drives: Fiesta Mk7 Zetec S
- Refferer: Search Engine
Grealish Panther Black MK7 ZS
Since I got the car beginning of February I have done these changes only minor at the moment!
Fiesta Tailored Car Mats
LockWood 'S' Door Sills/Kick Plates
'Zetec S' Badge - Didn't have one when I got the car
Bee Sting Aerial
Team Heko Wind Deflectors
Ford Dust Caps
Footwell Lighting
Gel Overlays (black/white)
Upgraded Bulbs Interior
Stuff to come soon:
Upgraded Bulbs exterior
Either different alloys or sprayed
Interior silver Plastics sprayed gloss black
Rear diffuser and front grill sprayed to match car bodywork
Fiesta Tailored Car Mats
LockWood 'S' Door Sills/Kick Plates
'Zetec S' Badge - Didn't have one when I got the car
Bee Sting Aerial
Team Heko Wind Deflectors
Ford Dust Caps
Footwell Lighting
Gel Overlays (black/white)
Upgraded Bulbs Interior
Stuff to come soon:
Upgraded Bulbs exterior
Either different alloys or sprayed
Interior silver Plastics sprayed gloss black
Rear diffuser and front grill sprayed to match car bodywork
- Attachments
-
- IMG_0834.gif (127.86 KiB) Viewed 3917 times
-
- IMG_0833.gif (148.83 KiB) Viewed 3917 times
-
- IMG_0832.gif (181.6 KiB) Viewed 3917 times
Last edited by Grealish on Fri Mar 15, 2013 8:40 pm, edited 2 times in total.
{text-align: center;}
-
- Fiesta Mk7 Regular
- Posts: 16
- Joined: Sat Feb 09, 2013 8:06 pm
- Drives: Fiesta Mk7 Zetec S
- Refferer: Search Engine
Re: Grealish Panther Black MK7 ZS
.
- Attachments
-
- IMG_0841.gif (125.72 KiB) Viewed 3917 times
-
- IMG_0837.gif (203.65 KiB) Viewed 3917 times
-
- IMG_0836.gif (153.71 KiB) Viewed 3917 times
-
- Fiesta Mk7 Regular
- Posts: 16
- Joined: Sat Feb 09, 2013 8:06 pm
- Drives: Fiesta Mk7 Zetec S
- Refferer: Search Engine
Re: Grealish Panther Black MK7 ZS
.
- Attachments
-
- IMG_0843.gif (200.41 KiB) Viewed 3917 times
-
- IMG_0842.gif (118.8 KiB) Viewed 3917 times
-
- Fiesta Mk7 Regular
- Posts: 16
- Joined: Sat Feb 09, 2013 8:06 pm
- Drives: Fiesta Mk7 Zetec S
- Refferer: Search Engine
Re: Grealish Panther Black MK7 ZS
Gel Overlays ordered!
Hopefully will be spraying the interior plastics gloss black soon, any tips and guidance when i do it guys?
Hopefully will be spraying the interior plastics gloss black soon, any tips and guidance when i do it guys?
-
- Fiesta Mk7 Regular
- Posts: 12
- Joined: Thu Feb 28, 2013 10:19 pm
- Drives: 1.25 zetec
- Refferer: GOOGLE
Re: Grealish Panther Black MK7 ZS
where did you get the bee sting aerial mate?
- patterson
- Fiesta Mk7 Major Contributor
- Posts: 937
- Joined: Tue Dec 06, 2011 8:20 pm
- Drives: Fiesta ZS
- Refferer: Search Engine
- Country: UK
- Location: Surrey
Grealish Panther Black MK7 ZS
Amazon is a good place but I got a cheap one and the signal does suffer not to sure about the full priced onestomkingshott wrote:where did you get the bee sting aerial mate?
Fiesta Mk7 Zetec S 2011
Check Out My Build Thread! http://www.fiestamk7.com/viewtopic.php?f=8&t=701
Check Out My Build Thread! http://www.fiestamk7.com/viewtopic.php?f=8&t=701
-
- Fiesta Mk7 Regular
- Posts: 16
- Joined: Sat Feb 09, 2013 8:06 pm
- Drives: Fiesta Mk7 Zetec S
- Refferer: Search Engine
Re: Grealish Panther Black MK7 ZS
Yeah mine was from eBay, signal does suffer, but apprently the more expensive ones, from halfords have good signal, might be getting one soon to try out!
- patterson
- Fiesta Mk7 Major Contributor
- Posts: 937
- Joined: Tue Dec 06, 2011 8:20 pm
- Drives: Fiesta ZS
- Refferer: Search Engine
- Country: UK
- Location: Surrey
Grealish Panther Black MK7 ZS
Yeah that's what I heardGrealish wrote:Yeah mine was from eBay, signal does suffer, but apprently the more expensive ones, from halfords have good signal, might be getting one soon to try out!
Fiesta Mk7 Zetec S 2011
Check Out My Build Thread! http://www.fiestamk7.com/viewtopic.php?f=8&t=701
Check Out My Build Thread! http://www.fiestamk7.com/viewtopic.php?f=8&t=701
-
- Fiesta Mk7 Regular
- Posts: 16
- Joined: Sat Feb 09, 2013 8:06 pm
- Drives: Fiesta Mk7 Zetec S
- Refferer: Search Engine
Re: Grealish Panther Black MK7 ZS
Gel Overlays have arrived and now fitted! will take some pics when i get chance to clean it, also might pop down to halfords later and see about these aerials and upgrading interior and exterior bulbs.
-
- Fiesta Mk7 Regular
- Posts: 66
- Joined: Thu Nov 29, 2012 12:33 pm
- Drives: 2010 Black Fiesta Zetec S
- Refferer: Internet
- Location: Halesowen - Birmingham - West Midlands
Re: Grealish Panther Black MK7 ZS
Don't let the little rip speed one, is a load of wank..as for the interior plastics, buy...
800 grit paper
1200 grit paper
Primer
Paint
Lacquer
Can all be got from halfords.
Sand off the silver paint using the 800 paper
Wash in a bucket of warm soapy water to remove all of the dust
Dry with a towel and leave on a radiator to dry thoroughly.
Apply your primer, I used about 5 coats.
Leave for a while to dry, use a heat gun/hair dryer to speed up this process, don't use too much primer, apply in very light costs using a side to side motion.
Once dry, sand down very lightly with the 1200 paper.
Wipe down removing any fine dust.
Apply your paint, again, using thin coats of paint to prevent any running. You can again use a heat gun/hair dryer to speed up this process, not on a too high speed as you may cause the paint to run.
Leave to dry after around 4 coats of paint, ensuring all of the areas are covered.
Apply your lacquer until you get the finish you want. I used about 4 or 5 coats
Would recommend leaving around at least half hour between coats of primer, paint and lacquer.
800 grit paper
1200 grit paper
Primer
Paint
Lacquer
Can all be got from halfords.
Sand off the silver paint using the 800 paper
Wash in a bucket of warm soapy water to remove all of the dust
Dry with a towel and leave on a radiator to dry thoroughly.
Apply your primer, I used about 5 coats.
Leave for a while to dry, use a heat gun/hair dryer to speed up this process, don't use too much primer, apply in very light costs using a side to side motion.
Once dry, sand down very lightly with the 1200 paper.
Wipe down removing any fine dust.
Apply your paint, again, using thin coats of paint to prevent any running. You can again use a heat gun/hair dryer to speed up this process, not on a too high speed as you may cause the paint to run.
Leave to dry after around 4 coats of paint, ensuring all of the areas are covered.
Apply your lacquer until you get the finish you want. I used about 4 or 5 coats
Would recommend leaving around at least half hour between coats of primer, paint and lacquer.